|
|
|
Materials and Recycling, Manufacturing |
|
97 |
FATIGUE AND BUCKLING ANALYSIS OF AUTOMOTIVE COMPONENTS CONSIDERING FORMING AND WELDING EFFECTS
K. T. LEE, C. S. PARK, H. Y. KIM
Int J Automot Technol. 2017;18(1):97-102. DOI: https://doi.org/10.1007/s12239-017-0010-z
 
|
Cited By 12 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
285 |
LIFE ESTIMATION OF HOT PRESS FORMING DIE BY USING INTERFACE HEAT TRANSFER COEFFICIENT OBTAINED FROM INVERSE ANALYSIS
D. Y. KIM, H. Y. KIM, S. H. LEE, H. K. KIM
Int J Automot Technol. 2015;16(2):285-292. DOI: https://doi.org/10.1007/s12239-015-0030-5
|
|
Cited By 4 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
317 |
FATIGUE LIFE PREDICTION OF A RUBBER MATERIAL BASED ON DYNAMIC CRACK GROWTH CONSIDERING SHEAR EFFECT
H. J. KIM, M. W. SONG, H. I. MOON, H. KIM, H. Y. KIM
Int J Automot Technol. 2014;15(2):317-324. DOI: https://doi.org/10.1007/s12239-014-0032-8
|
|
Cited By 8 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
935 |
SHEET METAL FORMING SIMULATION CONSIDERING DIE DEFORMATION
K. Y. CHOI, M. G. LEE, H. Y. KIM
Int J Automot Technol. 2013;14(6):935-940. DOI: https://doi.org/10.1007/s12239-013-0103-2
|
|
Cited By 15 |
|
|
|
|
|
Engine, Emission Technology |
|
717 |
IMPROVED HOT-STAMPING ANALYSIS OF TUBULAR BORON STEEL WITH DIRECT MEASUREMENT OF HEAT CONVECTION COEFFICIENT
J. K. PARK, Y. S. KIM, O. S. SEO, M. G. LEE, H. Y. KIM
Int J Automot Technol. 2013;14(5):717-722. DOI: https://doi.org/10.1007/s12239-013-0078-z
|
|
Cited By 11 |
|
|
|
|
|
Automobile Body and Safety |
|
459 |
NUMERICAL PREDICTION OF VARIOUS FAILURE MODES IN SPOTWELDED METALS
N. T. NGUYEN, D. Y. KIM, J. H. SONG, K. H. KIM, I. H. LEE, H. Y. KIM
Int J Automot Technol. 2012;13(3):459-467. DOI: https://doi.org/10.1007/s12239-012-0043-2
|
|
Cited By 9 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
611 |
IMPROVED METHOD FOR ANALYZING AUTOMOTIVE TRANSMISSION PARTS (SHAFT/GEAR) MANUFACTURED USING THE WARM SHRINK FITTING PROCESS
T. J. KIM, H. Y. KIM, B. C. HWANG, H. J. KANG, C. KIM
Int J Automot Technol. 2009;10(5):611-618.
|
|
|
|
|
Engine, Emission Technology |
|
649 |
EFFECT OF INTAKE VALVE SWIRL ON FUEL-GAS MIXING AND SUBSEQUENT COMBUSTION IN A CAI ENGINE
J. N. KIM, H. Y. KIM, S. S. YOON, S. D. SA
Int J Automot Technol. 2008;9(6):649-657.
|
|
|
|
|
Engine, Emission Technology |
|
687 |
EFFECT OF VALVE TIMING AND LIFT ON FLOW AND MIXING CHARACTERISTICS OF A CAI ENGINE
J. N. KIM, H. Y. KIM, S. S. YOON, S. D. SA, W. T. KIM
Int J Automot Technol. 2007;8(6):687-696.
|
|
|
|
|
Automobile Body and Safety |
|
185 |
INJURY PERFORMANCE EVALUATION OF THE CHILD RESTRAINT SYSTEMS
Y. J. SHIN, H. KIM, S. B. KIM, H. Y. KIM
Int J Automot Technol. 2007;8(2):185-191.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
847 |
Development of an Optimization Technique of a warm Shrink Fitting Process for an Automotive Transmission Parts
H. Y. KIM, C. KIM, W. B. BAE
Int J Automot Technol. 2006;7(7):847-852.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
741 |
Fatigue Life Prediction of Rubber Materials using Tearing Energy
H. KIM, H. Y. KIM
Int J Automot Technol. 2006;7(6):741-747.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
565 |
CRUSHING CHARACTERISTIC OF DOUBLE HAT-SHAPED MEMBERS OF DIFFERENT MATERIALS JOINED BY ADHESIVE BONDING AND SELF-PIERCING RIVET
M. H. LEE, H. Y. KIM, S. I. OH
Int J Automot Technol. 2006;7(5):565-570.
|
|
|
|
> Browse Articles > Author Index
